KAYA Atelier
Couldn't load pickup availability
Product Description
Description of the battery pack for the robot:
Product size: 10*10*8.72CM
Packaging size: 10.8*10*10CM (color box packaging)
Product net weight: 155g
Product gross weight: about 200g (with battery about 240g)
Box specification: 45×45×45cm outer box, 64 pieces in the whole box, about 15kg
Battery: The battery model uses 3 AA batteries! The factory default is without battery.
Packing instructions: The battery model is packaged in English, with CE, MADE IN CHINA marks, see the packaging diagram on the details page, and there is a simple product introduction on the box. The charging model is packaged in Chinese
Instructions for charging:
Product size: 10*10*8.72CM
Packaging size: 10.8*10*10CM (color box packaging)
Product weight: about 270g with packaging, about 220g without packaging
Box specification: 45×45×45cm outer box, 64 pieces in the whole box, about 15kg
Packaging instructions: The outer packaging box of the charging model has only a brief description in Chinese. The outer box has an inconspicuous LOGO, and the product has no LOGO
Battery: Built-in rechargeable lithium battery for power supply, with USB cable
Charging instructions: The red light is always on when the USB cable is plugged in to charge, and the green light is always on when the charging is complete. The charging indicator does not light up when the cable is not plugged in.
Rated input: DC 5V 1A
Interface: Micro USB
Nominal voltage: 3.7V
Nominal capacity: 600mAH
Packaging accessories: host *1, charging cable *1, feather accessories *2
Special Note: From 128 pieces at a time, English labels can be attached (simple self-adhesive stickers whose side length does not exceed 5CM, the buyer needs to provide the label content)!
Regarding the manual, since the product only needs to be turned on with a button, there is no other product manual included.
【Instructions for use】:
1. After unpacking, install the battery (it is recommended to charge the charging model until the green light is always on)
2. Short press the product on/off key to turn on the product, the LED indicator lights up and the product starts to run, 360° random rotation, and the laser and the cat-friendly stick rotate randomly. Short press the switch again to turn off, and the indicator light goes out.
3. After running for about 4 minutes, it will automatically stand by, and it will restart after slapping the palm or making a sound. Does not trigger within 5 seconds after automatic standby.
4. Two feather cat sticks are installed on both sides of the top of the product by rotating.
5. After the charging is completed, unplug the charging cable in time, please use the 5V1A charging interface (Apple phone charger or computer USB interface can be used).
